µ-FLOW
Mass Flow Meters / Controllers for liquids
General
µ-FLOW are Liquid Flow Meters/Controllers for ultra low flow ranges. The instruments operate on a thermal, thru-flow measuring principle. The flow meter can be connected to a control valve to form a closed control loop.
Lowest range 1,5 ... 30 mg/h for meters and 5 ... 100 mg/h for controllers
Highest range 0,1 ... 2 g/h (fluids with thermal properties similar to IPA / H2O)
Note:
For higher flow ranges, Bronkhorst High-Tech offers the LIQUI-FLOW® series.
Ranges: 0,1 ... 5 g/h up to 0,4 ... 20 kg/h H2O-equivalent.
Flow control
Flow control is achieved by integrating a control valve onto the body of the Liquid Flow Meter. This control valve has a purge connection to eliminate air or gas during start-up. The electronic control function forms part of the normal circuitry in the meter.
Features
- No moving parts
- Thru-Flow measurement
- Attitude insensitive
- Fast and accurate measurement
- Negligible dead-volume
- In combination with a control valve: continuous and stable control
- Analog or digital: RS232, Profibus-DP®, DeviceNetTM, Modbus or FLOW-BUS
- Stainless Steel sensor; on request: PEEKTM, Fused Silica
- NEW: 1000 bar (15000 psi) LFM for 150 up to 450 mg/h FS (based on H2O)
Applications
- Pharmaceutical industry
- Food industry (flavors, additives)
- Biotechnical industry
- Analytical laboratories
- Evaporation processes (see CEM-system)
- HPLC applications
Flow capacities (based on IPA or H2O equivalent)
Liquid Flow Meter (PN400)
Series L01 |
min. 1,5 ... 30 mg/h
max. 0,1 ... 2 g/h |
Liquid Flow Meter (PN1000)
Series L02-20D |
min. 7,5 ,... 150 mg/h
max. 22,5 ... 450 mg/h |
Liquid Flow Controller (PN100)
Series L01V02 |
min. 5 ... 100 mg/h
max. 0,1 ... 2 g/h |
Leaflet
For more information see leaflet "µ-FLOW series L01"
| 
L01 Mass Flow Meter
ยต-FLOW Mass Flow Controller
|
