The temperatures are sky high! All winter you've thought about going camping, travelling with your caravan and planning precious family trips. Finally now it’s the time to leave everything behind, and for a moment, forget the busy daily live and struggling at home. However, everywhere you go, Bronkhorst is travelling with you. Bronkhorst plays a role in many more applications than you think, also when you go camping. Let me guide you through some mainstream products you often see at a camping site, and the involvement of mass flow controllers.
If you are travelling to your holiday destination by car, you will constantly look at some Bronkhorst solutions. Let’s start with the dashboard of your car. Many cars have a leather dashboard; at least, it looks like leather. A major company manufactures ‘skin’ that covers a car's dashboard, to give it this ‘leather look’. The skin is produced by spraying liquid, coloured polyurethane into a nickel mould. A Coriolis mass flow controller combined with a valve forms the basis of this solution to accurately supply external release agent to the nickel mould surface.
But also the foam within the dashboard is manufactured by using Bronkhorst products. To create foam, a gas is added to a mixture, containing acrylonitrile-butadiene-styrene (ABS) or polyvinyl chloride (PVC), to give it the right volume. Too much gas will make the foam unstable, too little and you’ll get a heavy solid block. Therefore, it is utterly important that the correct amount of gas is added with an accurate gas flow controller.
If you look beyond your dashboard, you’ll look through the front window of your car. To control the light transmittance of glass, but also to make glass water repellent, protect it from mechanical and chemical stress, increase the scratch resistance and shatter protection, thermal mass flow controllers are used for the coating process. By controlling individually process gas flows, film thickness uniformity improvements are achieved.
Coating on headlights
When polycarbonate was introduced as a replacement for headlights glass in the early 1980s, new problems arised. Headlights are subject to a harsh environment. Due to the position in the front of a car, critical parameters for lifetime and performance are weather ability, scratches and abrasion. To protect headlights from these factors, scratch and abrasion coatings have been developed that are sprayed on the headlights with the help of robots in which Coriolis mass flow controllers control the flow to the spraying nozzles.
However, surface treatment is not only applicable for glass and dashboards. If you have experience with camping, you will be familiar with how fierce the summer weather sometimes can be. The awning of your caravan needs to be water repellent - this also applies to your raincoat - to sustain the heavy rainfall now and then. To make fabrics and textiles hydrophobic, Empa - a research institute of the ETH Domain, applies plasma polymerisation to deposit thin, nanoscale layers on top of fabrics and fibers. For this, they are using a Controlled Evaporation and Mixing system, in short a CEM system. In one of our previous blogs ‘Hydrophobic coating, the answer to exercising in the rain’ you can read about this application.
Mass flow controllers are used to make awnings hydrophobic
Bronkhorst is also involved with many smaller attributes you will encounter on a campingsite. Most people still enjoy the comfort of gas for heating or cooking on the stove. But also with gas we are able to fire up the barbecue in no time at all, in comparison with the old-fashioned briquettes that are sometimes hard to ignite. When gas escapes from a pressurized cylinder, you’ll recognize this from its penetrating scent. However, like Sandra Wassink stated in her blog “How mass flow controllers make our gas smell”, natural gas is odorless. By controlled supply of odorants like Tetrahydrothiophene (THT) or Mecaptan with a mass flow controller, the scent is added to the natural gas on purpose.
Let’s stay with the topic scent for a moment. For when we want to decrease the amount of mosquitos in our surroundings, we often enlight a citronella candle when we are getting tired of using the flyswatter. With the CORI-FILL dosing technology, Bronkhorst offers an easy-to-use setup to dose fragrances, like citronella, in candles. The addition of fragrance to a candle should be carefully monitored to ensure the candle burns cleanly and safely. To read in more detail about the production of scented candles, please read the blog of Graham Todd.
However a candle can bring much light to your surroundings, you won’t take a candle with you when you haste to the camping toilets at night. Instead you will use a flashlight of course. The working principle of the LED (Light Emitting Diode) inside this flashlight is a technology where Bronkhorst plays its part. LED works via the phenomenon called electroluminescence, which is the emission of light from a semiconductor (diode) under the influence of an electric field. By applying a semiconducting material like Gallium arsenide phosphide for instance, the manufacturing of red, orange and yellow light emitting diodes is possible.
I already told you so much, but frankly, just a tiny bit of all the camping applications we are involved at. Hopefully you got some more insights on the importance of Bronkhorst in many industries, also when you go camping.
If you want more information concerning the discussed applications, please contact us.
Want to stay up to date on new flow solutions? Would you like to receive every month the latest tips in your inbox?